• ULC-10G/12G
  • ULC-10G/12G
  • ULC-10G/12G
  1. The figures in winding capacity and minimum fall load are obtained with the use of 4B drum. When the 5B drum is used, the winding capacity is reduced to 0.87 time from the above ratings.
  2. “a/b” in speed and full-load current are measured under the 50Hz; “a” and 60Hz; “b” power respectively.
  3. The single-phase except 100V corresponds to 220V power, whereas the three-phase except 200V to 400V power (Full-load current is changeable by individual voltage).
  4. Use environment: Ambient temperature; -10℃ to +40℃ (subject to no freezing・dew condensation). Ambient humidity less than 85%RH.
  5. Time rating is the value measured at +20℃. If the temperature exceeds this value, the time rating gets shorter.
  6. Shutter shall be surely equipped with the emergency limit switch.
  7. Durability: 10,000 opening and closing
  8. It is available to produce the operator with different operating voltage except for above.
  9. You can download PDF catalog and manual down below and for details or inquiry, please contact us!


Model ULC-10G ULC-12G
Voltage Single-phase 220V Single-phase 220V Three-phase 400V

Drum Sprocket

Winding Capacity(kg) 209(2049N) 258(2530N)
Min. Fall Load(kg) 10(98N)
Winding Drum Speed(r.p.m) 5.0/6.2 4.8/6.0 5.0/6.0
Drum Sprocket
Winding Capacity(kg) 250(2451N) 310(3040N)
Min. Fall Load(kg) 12(118N)
Winding Drum Speed(r.p.m) 4.2/5.1 4.0/5.0 4.2/5.0
Output Shaft Torque(N・m) 26.9 33.2
Min. Fall Torque(N・m) 0.98
Speed(r.p.m) 27.7 26.7/33.1 28.0/33.5
Motor Output(kW) 0.1 0.125
Speed(r.p.m) 1290/1590 1240/1540 1300/1560
Full-load Current(A) 1.27/1.19 1.46/1.56 0.49/0.41
Time Rating(Minute) 5
Max. Range of Limit Switch(Turns) 650(in Output Shaft)
Sprocket(Output side/Drum side) #40-T9/#41-T50, T60
Roller Chain #40
Operator Weight(kg) 12

Page Top